LAD.MV56U-Firmware Free Download Firmware for Free Download LED & LCD TV. LAD.MV56U-All this is a Complete Combo Board simply designed for LCD & LED TV use. All the Facilities can be used easily in this Board Headphone Jack, USB Input, PC Input, VGA Input, HDMI Input, and Component Input LAD.MV56U-All Board. There is no need to install the backlight separately on this board. There is a backlight inverter circuit and power supply available inside. The LAD.MV56U-Firmware Free Download-All combo boards use in many countries.
Basic Information PCB Board
Model No: LAD.MV56U-All
Main Chip: TSUMV56UU / TSUMV56RUE / TSUMV56RUU-Z1
Resolution Supported UP To 1920 X 1080 to Panel LCD/LED TV
Screen Supported: Up 32” to 42” Panel LCD/LED
Back Light Supported Up To 300 Ma
Panel Voltage DC: +12 V
Main AC Power Supply: 220 V
HDMI Input: 2 Ports
USB Input: 2 Ports
VGA Input: 1 Port
PC Input & Audio / Video: Yes
Headphone: Yes
RF TV: 1 Port
Component Input: Yes
Multi-Language OSD: Yes
Aspect Ratio: 4:3 / 16:9 / 16:10
USB Port Upgrade: YES
LAD.MV56U-All Service Code
The service code is used to unlock factory mode or the board’s internal parameters setting. These settings allow the technicians to control the parameters of the Led TV logo, resolution, brightness and contrasts, etc.
To unlock the factory mode for LAD.MV56U-All PCB Board use the following steps
- Press the Menu button from the remote keyboard.
- Enter the numeric code 1147 through the remote.
How to download and run Firmware LAD.MV56U-All
- To download the required firmware click on Download Button given below table.
- When the download is completed, the file will be stored in your PC download folder.
- Copy the firmware file into an empty USB. Make sure USB has no other data.
- Plugin the USB in the LED/ LCD Main Board USB port.
- Switch ON the LED TV power and Wait until the LCD/LED Flashing Stop or LED IR Flashing Speedily Working.
- When the LED IR stop flashing, remove the USB from the TV LCD/LED board.
- Note: Do this process fast otherwise it will not work.
Download Firmware Also: P130-M6 V6.0-firmware
Note: Important Note Updating Firmware
LedTvSoftwares.com is not responsible for any type of loss or damage to the PCB board during the installation of firmware. You can download and run firmware on your own responsibility.