Universal Combo BOARD LCD & LED TV
LAD.MV59S Firmware Free Download is a Complete Combo Board simply designed for LCD & LED TV use. All the Facilities can be used easily in this Board Headphone Jack, USB Input, PC Input, VGA Input, HDMI Input, and Component Input LAD.MV59S Firmware Free Download Board. There is no need to install the backlight separately on this board. There is a backlight inverter circuit and power supply available inside. The LAD.MV59S combo boards use in many countries. TP.VST59S.PB813
Basic Information PCB Board
Model No: LAD.MV59S
Main Chip:
Resolution Supported UP To 1920 X 1080 to Panel LCD/LED TV
Screen Supported: Up 32” to 42” Panel LCD/LED
Back Light Pin Information:
Back Light Supported Up To 300/Ma
Panel Voltage Dc: +12 V
Main Ac Power Supply: 220 V
HDMI Input: 2 Ports
USB Input: 2 Ports
VGA Input: 1 Port
PC Input & Audio / Video: Yes
Headphone: Yes
RF TV: 1 Port
Component Input: Yes
Multi-Language OSD: Yes
Aspect Ratio:
USB Port Upgrade: YES
LAD.MV59S Service Code
The service code is used to unlock factory mode or the board’s internal parameters setting. These settings allow the technicians to control the parameters of the Led TV logo, resolution, brightness and contrasts, etc.
To unlock the factory mode for LAD.MV59S PCB Board uses the following steps.
- Press the Menu button from the remote keyboard
- Enter the numeric code 7710 through remote
How to download and run Firmware LAD.MV59S
- To download the required firmware click on Download Button given below table.
- When the download is completed, the file will be stored in your PC download folder.
- Copy the firmware file into an empty USB. Make sure the USB has no other data.
- Plugin the USB in the LED/ LCD Main Board USB port.
- Switch ON the LED TV power and Wait until the LCD/LED Flashing Stop,s or LED IR Flashing Speedily Working.
- When the LED IR stops flashing, remove the USB from the TV LCD/LED board.
- Note: Do this process fast otherwise it will not work.
Note: Important Note Updating Firmware.
LedTvSoftwares.com is not responsible for any type of loss or damage to the PCB board during the installation of firmware. You can download and run firmware on your own responsibility.