P130-M6 V 6.0 Universal Combo BOARD LCD & LED TV
P130-M6 V 6.0 Firmware Free Download this is a Complete Combo Board simple and designed for LCD & LED TV use. All the Facilities can be used easily in this Board Headphone Jack, USB Input, PC Input, VGA Input, HDMI Input, and Component Input P130-M6 V 6.0 Firmware Free Download Board. There is no need to install the backlight separately on this board. There is a backlight inverter circuit and power supply available inside. P130-M6 V 6.0 combo boards use in many countries.
Basic Information PCB Board:
Model No: P130-M6 V 6.0
Main Chip: TSUMV56RUE-Z1 / MSD3663LU
Resolution Supported UP To 1920 X 1080 to Panel LCD/LED TV
Screen Supported: Up 49” to 55” Panel LCD/LED
Back Light Pin Information:
Back Light Supported Up To:
Panel Voltage DC: +12 V
Main AC Power Supply: 220 V
HDMI Input: 2 Ports
USB Input: 2 Ports
VGA Input: 1 Port
PC Input & Audio / Video: Yes
Headphone: Yes
RF TV: 1 Port
Component Input: Yes
Multi-Language OSD: Yes
Aspect Ratio: 16:9
USB Port Upgrade: YES
P130-M6 V 6.0 Service Code:
The service code is used to unlock factory mode or the board’s internal parameters setting. These settings allow the technicians to control the parameters of the Led TV logo, resolution, brightness and contrasts, etc.
To unlock the factory mode for P130-M6 V 6.0 PCB Board use the following steps:
- Press the () button from the remote keyboard.
- Enter the numeric code () through the remote.
How to download and run Firmware P130-M6 V 6.0
- To download the required firmware click on Download Button given below table.
- When the download is completed, the file will be stored in your PC download folder.
- Copy the firmware file into an empty USB. Make sure the USB has no other data.
- Plugin the USB in the LED/ LCD Main Board USB port.
- Switch ON the LED TV power and Wait until the LCD/LED Flashing Stops or the LED IR Flashing Speedily Working.
- When the LED IR stops flashing, remove the USB from the TV LCD/LED board.
- Note: Do this process fast otherwise it will not work.
Note: Important Note Updating Firmware:
LedTvSoftwares.com is not responsible for any type of loss or damage to the PCB board during the installation of firmware. You can download and run firmware on your own responsibility.