T.R85.03 Software-Firmware Download Free LED TV. You easily can download T.R67.03.V3=T.R83.031=T.R85.031V.09=T.R67.031=T.R67.03=T.R83.801.T.R85.03 Software Free Download Firmware & Dump flash, Bin file, Circuit Diagram, PDF files, Datasheet Free Download.T.R85.03 Main chip 8503 Sound chip: CS84636S.T.R85.03 Universal Board jack Information TV/PC/VGA/HDMI/USB+7 Key Button+1ch 6bit 30 LVDS Cable. Input Interface: PC / HDMI / TV / AV / USB Multi, Screen interface, LVDS Single 6 / 8, Double 6, Resolution Support high screen 1920X1080, Screen voltage 3.3V / 5V / 12V (Jump cap).
Description T.R85.03
- VGA PC Port
- DC 3.3V / 5V / 12V (Jump cap)
- USB Port
- AVA Port
- Head Phone Port
- USB Port
- R.F Antina
- LVDS Cable Jack
- Inverter Jack
- Main Power Jack
- Speaker Jack
- IR&KEY Jack
- Main System IC
- Sound IC
- Flash IC
Jack Information IR & KEY
- NO 1: Ground
- NO 2: KEY 7
- NO 3: KEY 6
- NO 4: KEY 5
- NO 5: KEY 4
- NO 6: KEY 3
- NO 7: KEY 2
- NO 8: KEY 1
- NO 9: KEY 0
- NO 10: Ground
- NO 11: IR
- NO 12: GRN/BLU Indicator
- NO 13: RED Indicator
- NO 14: +5 V
Jack Information Speaker Connector
- 1: LO
- 2: Ground
- 3: Ground
- 4: RO
LVDS Information T.R85.03 Software-Firmware
- No 1: + Power Supply
- No 2: + Power Supply
- No 3: + Power Supply
- No 4: GND
- No 5: GND
- No 6: NC
- No 7: TX00-
- No 8: TX00+
- No 9: TX01-
- No 10: TX01+
- No 11: TX02-
- No 12: TX02+
- No 13: GND
- No 14: GND
- No 15: CLK-
- No 16: CLK+
- No 17: TX03-
- No 18: TX03+
- No 19: TXE0-
- No 20: TXE0+
- No 21: TXE1-
- No 22: TXE1+
- No 23: TXE2-
- No 24: TXE2+
- No 25: GND
- No 26: GND
- No 27: TXE CLK-
- No 28: TXE CLK+
- No 29: TXE3-
- No 30: TXE3+
Service Code T.R85.03
The service model allows you to change the board’s internal parameters or unlock the factory code, Resolution Code and etc.
Through the remote, enter the numeric code: Menu + 1147
How to download and install T.R85.03 Software-Firmware.
- Click on the Download Button given below the table to download the required firmware.
- Downloaded files are stored in the download folder on your PC.
- Put the firmware file on an empty USB drive. Ensure the USB has no other data on it.
- Plug the USB into the USB port on the LED/ LCD Main Board.
- Wait until the LED IR or LCD/LED flashing stops after you turn on the LED TV power.
- As soon as the LED IR stops flashing, remove the USB cable from the LCD/LED board.
- In order for this process to work, it must be completed quickly.
Note: Important T.R85.03 Software Updating Firmware:
LedTvSoftwares.com is not responsible for any type of loss or damage to the PCB board during the installation of firmware. You can download and run firmware on your own responsibility.